Aquaero 5 XT specifications
The Aquaero 5 XT, in the version received in brushed steel color, is made of a solid front steel grille in witch is located in the central part the display. In the right-front of the controller circumscribed by a semi-circle, we find the 3 touch buttons that replace the mechanical ones of the PRO version. On the other side instead we can see a circular window where the IrDA sensor is placed (English acronym that stands for Infrared Data Association) to connect to the remote controller. We continue illustrating the side mounting brackets.
Of no less importance, is the wiring diagram and the number of connectors of which is fitted the Aquaero 5.
Following the pattern shown in the figure that you will find in the manual
we find, starting from the molex and going clockwise, the following connectors:
- POWER: molex connector dedicated to primary power supply of the controller.
- STANDBY: bipolar connector for standby. When connected via proprietary cable to the power supply, the Aquaero 5 will stay on while the computer is in Soft-Off (S5) that is in standby mode (standby). Requires special cable not included.
- RELAY: Connected to a button (switch), can be useful for shutting down the PC in an emergency. Requires special cable not included.
- RGB-LED: connector for the diode power for LED lighting (up to 3).Requires special cable not included.
- FLOW: Dedicated to the connection of any flow sensor, the compatibility has to be verified.
- USB connector for communication between the PC and Aquaero and for power supply standby. Cable included.
- SENSORS: Multi connector dedicated to connect up to 8 sensors for measuring temperature. Check possible compatibility.
- TACHO: If used, the Aquaero can generate a signal that can be used to configure certain alarms/events. Included cable.
- Aquabus 1/2: Dedicated connector for interfacing the controller to other devices provided by AquaComputer and expand in this way the capabilities of the controller. Requires special cable not included.
- IR-LED: connector dedicated to a possible connection to a LED transmitter.
- PWM 1/2: 4-Pin Connector for Fan Pulse Width Modulation, or 12 volt input with pulse width modulation.
- FAN 4: connector that may be used for connecting a Rheobus in cascade, to control the fans.
- FAN 2/3: Dedicated outputs for connection of the fans only, but no additional features inherent in the 4 and 1 ports. Maximum output power of 10W per channel. Power is dynamic and varies according to temperature.
- FAN 1: Fan connector, can be alternately used for a second flow sensor.
Please note that the package contains a comprehensive manual in English language.
